BIGTREETECH TFT35 V3.0

Features
·ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz
·This display board has higher compatibility. Users can select two work modes: UART   serial      
port screen mode and 12864 screen mode
·Reserve the extension port of filament breaking detection (FIL-DET)
·Reserve the extension port of automatic shutdown after printing (PS-ON)
·LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
How to obtain Firmware
·Get it from seller’s service or technical staff
·Log in the open source website of our company to download: github.com/bigtreetech
How to Update Firmware
Firmware file name:
BIGTREE_TFT35_V3.0. ( version number).bin
First copy the above firmware to SD root directory, and then insert the card into
the SD card slot of the board. Next please re-power the board or press the reset
key, and wait for about 10 seconds before the update is completed.
Notice: The name of the firmware file in the SD card cannot
be changed. (including capital and small letters)
 
Specifications
 
Product Name: BIGTREETECH TFT35 V3.0 Display
SD Card Logic Voltage: 3.3V or 5V,support MEGA2560 motherboard, with
higher compatibility
Power Input: DC5V
Microprocessor: STM32F207VCT6
Working Mode: Touch screen mode, 12864LCD mode
Appearance Size: 110*58mm
SD Card And U Disk: Support touch screen mode