VORON V2.4 LightWeight CNC Parts Kit
First bacth will arrvie at our warehouse around mid Augest. Please signup for e-mail nofitication if you are interesting.
Manual: Click Here
This is a re-designed Voron 2.4 metal part that brings you the full advantages of metal into your Voron 2.4.
Unlike the other aluminium kits that is mechined by the plastic design drawing. Referring to the Voron documentation, it could be 5X heavier than the ABS printed parts, and it also might cause some issues due to high stiffness while the gantry needs flexibility.
The designer of this kit has more than 10 years of experience in industrial design. Especially the new gantry part design, it’s much lighter than the printed parts and brings in a new structure to gain the flexibilities which the gantry needs.
And all this gives the potential of driving your Voron 2.4 to an extremely high moving speed with incredible acceleration speed.
We have tested the following settings:
- 800mm/s + 70k acceleration.
- 500mm/s + 100k acceleration.
- 1300mm/s + 20k acceleration.
This kit is fully compatible with R2 and R1, AfterBurner/CW1 and StealthBurner/CW2.
Unlike the other aluminium kits, we don’t have a metal Stealthburner/Afterburner which we do believe is better to have it printed.
Please Notice:
This kit is considered an upgraded part, it doesn’t include all the functional components. Please refer to the BOM below to find out what you might need if you are building a brand new Voron 2.4
BOM:
| Name | Number | Unit |
| Z Belt Clip Upper | 4 | pcs |
| Z Tensioner BracketA | 2 | pcs |
| Z Tensioner BracketB | 2 | pcs |
| Z TensionerA | 2 | pcs |
| Z TensionerB | 2 | pcs |
| Z Belt Drive A | 2 | pcs |
| Z Belt Drive B | 2 | pcs |
| Z Motor Mount A | 2 | pcs |
| Z Motor Mount B | 2 | pcs |
| Belt Tensioner A | 2 | pcs |
| Belt Tensioner B | 2 | pcs |
| Z Joint Upper | 4 | pcs |
| Z Joint Lower | 4 | pcs |
| Front Idler Left Lower | 1 | pcs |
| Front Idler Right Lower | 1 | pcs |
| Front Idler Left Upper | 1 | pcs |
| Front Idler Right Upper | 1 | pcs |
| Tensioner Left | 1 | pcs |
| Tensioner Right | 1 | pcs |
| XY Joint Left Upper | 1 | pcs |
| XY Joint Right Upper | 1 | pcs |
| XY Joint Left Lower | 1 | pcs |
| XY Joint Right Lower | 1 | pcs |
| stand offM3x7x23mm | 8 | pcs |
| A Drive Frame Upper | 1 | pcs |
| A Drive Frame Lower | 1 | pcs |
| B Drive Frame Upper | 1 | pcs |
| B Drive Frame Lower | 1 | pcs |
| Stand off2x5x23mm | 10 | pcs |
| Stand off5x8x4.5mm | 8 | pcs |
| X Carriage Pivot Block(for MGN9H) | I | pcs |
| X Carriage Pivot Block A(ForMGN9H) | 1 | pcs |
| X Carriage Frame | 1 | pcs |
| BLtouch Bracket | 1 | pcs |
| XY Cable Chain Bridge | 1 | pcs |
| Cable Cover | 1 | pcs |
| M5 Knurled Nut | 4 | pcs |
| Rubber Foot | 4 | pcs |
| F625 | 12 | pcs |
| PB5 | 4 | pcs |
| Hex Bolt M5x40 | 4 | pcs |
| Spring | 4 | pcs |
| HM5x38 | 2 | pcs |
| PM5x30 | 10 | pcs |
| HM5x22 | 5 | pcs |
| PM5x16 | 40 | pcs |
| HM5x14 | 10 | pcs |
| PM5x10 | 30 | pcs |
| HM3x36 | 2 | pcs |
| HM3x32 | 10 | pcs |
| HM3x28 | 15 | pcs |
| HM3x20 | 5 | pcs |
| HM3x16 | 15 | pcs |
| HM3x14 | 4 | pcs |
| PM3x8 | 100 | pcs |
| PM3x6 | 30 | pcs |
| KM3x6 | 14 | pcs |
| M5 T-nut HNTAJ5-5 | 60 | pcs |
| M3 T-nut HNTAJ5-3 | 60 | pcs |
| MS 1mm Spacer | 16 | pcs |
| m3x3 set screw | 10 | pcs |